Hello to all
Recently i did a re-format of my laptop pc and after the recovery of its entire previous contents, now when i try to run a Windev application i receive this error:
-----------------------------------------------------------------------------------
Error at line 5 of Exit of Nome_Utente process.
HReadSeek function called.
Unexpected system error.
If this error systematically occurs in the same conditions, contact PC SOFT Hot Line and specify:
- the error circumstances,
- a window, a project or the code lines used to replicate the problem,
- the details below.
Détails techniques :
Module : Asl_DelibereView.exe
Version du module : 1.02W
Adresse de base : 00000000
Erreur système : Access violation (GPF)
EIP = 2966835E
OS : Windows XP ou .NET Service Pack 3(5.1.2600)
Technical Information
Project : Asl_DelibereView
Dump error of module .
- WL Call:
Processing , line , thread
Function , syntax #
- Level: fatal error (EL_FATAL)
- Error Code: 1020
- WD55 Error Code: 0
- No system error code
- No system error message
- What happened?
Unexpected system error.
If this error systematically occurs in the same conditions, contact PC SOFT Hot Line and specify:
- the error circumstances,
- a window, a project or the code lines used to replicate the problem,
- the details below.
Détails techniques :
Module : Asl_DelibereView.exe
Version du module : 1.02W
Adresse de base : 00000000
Erreur système : Access violation (GPF)
EIP = 2966835E
OS : Windows XP ou .NET Service Pack 3(5.1.2600)
- Debug Information:
Registres :
EIP = 2966835E EBP = 0012C428
EAX = 000000FC EBX = 0091A984
ECX = 00000000 EDX = 0091A970
ESI = 000000FD EDI = 01946104
Pile des appels :
[Asl_DelibereView.exe (00000000), 1.02W] 2966835E
[Asl_DelibereView.exe (00000000), 1.02W] 296962F5
[Asl_DelibereView.exe (00000000), 1.02W] 29696127
[Asl_DelibereView.exe (00000000), 1.02W] 29699032
[Asl_DelibereView.exe (00000000), 1.02W] 2969BFFE
[Asl_DelibereView.exe (00000000), 1.02W] 2967EF20
[Asl_DelibereView.exe (00000000), 1.02W] 29679333
[Asl_DelibereView.exe (00000000), 1.02W] 296795C4
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 25588258
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 255423B9
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 2549EA80 : bDLLCompatible() + 230607 bytes
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 2549EA80 : bDLLCompatible() + 74639 bytes
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 2549EA80 : bDLLCompatible() + 152523 bytes
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 2549EA80 : bDLLCompatible() + 83116 bytes
[WD120HF.DLL (25460000), 12.00Kg, 01A120056c] 2549EA80 : bDLLCompatible() + 81760 bytes
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 104157 bytes
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E72731
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25FA9238
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 42704 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25F75A60-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E9C1F0 : EXT_pszGetMessageErreurDelegue() + 76288 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E9C1F0 : EXT_pszGetMessageErreurDelegue() + 76288 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E9C1F0 : EXT_pszGetMessageErreurDelegue() + 76288 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 49616 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 49552 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48128 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48304 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48176 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48320 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48480 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48496 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48976 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48400 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48992 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 131984 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 134048 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48416 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48448 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48464 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25E74550 : WL_SetParam() + 48384 bytes-> INVALID, stack increased by 4
[WD120VM.DLL (25E60000), 12.01Cy, 01A120056c] 25F87F6E-> INVALID, stack increased by 4
Pile invalide
Fonction (7,118)
- Attached Information:
EIT_LOGICALTABLENAME :
EIT_PILEWL :
Exit of Nome_Utente (UserAccess.Nome_Utente), ligne 5
Initialization of Asl_DelibereView (), ligne 48
EIT_COMPOSANT :
EIT_DATEHEURE : 01/12/2009 16:00:51
- Identifier in .err: 1020

Help

------------------------------------------------------------------------------------------------------
I don't understand the reason why i receive this GPF error.
The connection to the MySql database is ready. I also have save the LIBMYSQL.DLL file into the system directory.
I also have tested the connection externally from Windev with Sqlyog and all is going fine..
No firewall problems.
The errors appear also with other applications compiled and definitely running before the re-format...Do i'm missing something??
Pls, can someone point me in the right direction to understand what is happening?
Thanks in advance.
Gianni